濟南雨棚的各種優勢豐富和方便了我們的生活，它有一個突出的優勢，那就是承重性能好。下面來詳細講講吧。

The various advantages of Jinan canopy enrich and facilitate our life. It has a prominent advantage, that is, good load-bearing performance. Let's talk about it in detail.

雨棚具有良好的承載性能，可以以較小的厚度承受相當大的載荷。雨棚的強度和剛度主要是根據其幾何形狀的合理性，直接壓縮材料來代替彎曲內力，從而充分發揮材料的潛力。因此，雨棚是一種經濟合理、強度高、剛度大、節省材料的結構形式。

The canopy has good bearing performance and can bear considerable load with small thickness. The strength and stiffness of the canopy are mainly based on the rationality of its geometry, directly compressing the material to replace the bending internal force, so as to give full play to the potential of the material. Therefore, the canopy is a structural form with economic rationality, high strength, high stiffness and material saving.

除上述空間結構外，還有組合雨棚結構、預應力網架結構、管桁架結構、張拉弦梁結構、點接式玻璃幕墻支撐結構、索穹頂結構等幾種常見的空間結構，都有自己的特點和使用范圍。

In addition to the above spatial structures, there are several common spatial structures, such as combined canopy structure, prestressed grid structure, pipe truss structure, tension chord beam structure, point connected glass curtain wall support structure, cable dome structure and so on, which have their own characteristics and application scope.

雨棚安裝前檢查板材的尺寸和預留量是否合適，一定要留出足夠的膨脹間隙，擰自攻釘時要保持均勻的力度，既要將板材和密封膠條壓實，也不要用力過猛將其壓壞。

Before the installation of the canopy, check whether the size and reserved amount of the plate are appropriate, and be sure to leave enough expansion gap. When screwing the self tapping screw, maintain uniform force, not only compact the plate and sealant strip, but also do not crush it too hard.

板材安裝好之后要將保護膜揭掉，安裝之前應將保護膜四周都揭開50mm左右，避免在安裝中將保護膜夾住。

After the plate is installed, remove the protective film. Before installation, remove about 50mm around the protective film to avoid clamping the protective film during installation.

安裝完成后要進行檢查，用噴淋試驗是否有漏水情況發生。試驗過程要認真，仔細觀察每個部分，有漏水隱患要馬上解決。

After installation, check whether there is water leakage by spraying test. The test process should be careful, and each part should be carefully observed. The hidden danger of water leakage should be solved immediately.

如果您想要了解更多的知識，您可以瀏覽我們的網站wuchenju.com.cn，我們會為您提供更詳細的信息。

If you want to know more, you can visit our website wuchenju.com.cn COM, we will provide you with more detailed information.